• Funk Motorsport Clamp on Exhaust Heat Shield
  • Funk Motorsport Clamp on Exhaust Heat Shield
  • Funk Motorsport Clamp on Exhaust Heat Shield
  • Funk Motorsport Clamp on Exhaust Heat Shield
  • Funk Motorsport Clamp on Exhaust Heat Shield

Clamp on Exhaust Heat Shield (Titanium or Carbon Fibre)


Funk Motorsport Clamp On Exhaust Heat Shield will protect specific areas from heat transfer, whilst allowing for easy fitment WITHOUT removal of the exhaust system!



The Funk Motorsport Clamp on Exhaust heat shield is here and is made from the same construction as our famous Mk2 turbo blankets! Don’t know how well these perform? Follow this link to see them in action in our videos!

Unlike traditional Exhaust Heat Wrap, these heat shields add versatility to your engine bay to protect specific areas or components that are susceptible to excessive heat transfer. The exhaust protection could include; a brake system’s master cylinder, electronic logging or sensor components, bulkhead protection, a motorcyclist’s leg, etc.

Clamp-on Heat Shields are perfect for a variety of applications whereby; the project is complete and exhaust removal is not an option, heat management is only vital in a specific area or a number of reasons prevent the exhaust being fully wrapped/covered. Some people use these purely from a mechanic safety point of view, and so protecting the technicians when inspecting components that are situated close to a hot exhaust system.

Each exhaust shield is very easy to fit, each shield comes complete with 4x 3-inch jubilee clips, though these can easily be swapped out for an application method which you are most comfortable with or which will work best with your build.

The shields measure 15cm x 30cm and are available in both Carbon Fibre and Titanium and each will have the ability to fit up to 4x jubilee clips in place.

Why is heat management so important? Find out here.

Additional information

Weight 0.7 kg
Dimensions 1500 × 0.55 cm

Titanium, Carbon Fibre

Additional Info

Note of caution:
This turbo blanket is not flammable. However if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced. Please ensure that all necessary precautions are taken in regards to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charging and fuel injection system. Funk Motorsport take no responsibility for fluid contamination our products.

Whilst this heat shield is removable after fitment, it is not designed to be removed once a number of heat cycles has been introduced into the product. After the blankets have been heated they will lose some of their internal construction properties, though we must stress that this does not reduce any thermal properties of the product.

Interior Surface:
Max Temperature Rating: 1260 Deg C
Continuous Use Limit: 1000 Deg C

Exterior Surface (Titanium)
Direct Contact Limit: 982 Deg C
Radiant Heat Limit: 1371 Deg C

Exterior Surface (Carbon Fibre)
Direct Contact Limit: 1032 Deg C
Radiant Heat Limit: 1421 Deg C


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.