Home / Heat Protection Sleeving / Wire Protection Sleeving (HT Leads and more)
From $18.75
Wire protection sleeving is used to provide added security in vital areas that can be prone to rubbing through. Common applications include HT leads fuel lines, bonnet release catches, ECU loom protection, Ignition cable protection, and electronic signal cables
Ready to ship! Delivered to you from 2 working days
Available in red, black, blue, silver and titanium this protection sleeving is easy to cut to your required length then can be completed and finished off using our heat shrink to secure your protection in place. Our wire protection sleeving has an approximate diameter of 10mm, and is sold in length of 1m.
Remember: Although 95% of applications do not require an Inside Out blanket, if you have an exhaust clamp, exhaust pipe or similar heat source that will be in direct contact with the outside of the blanket once fitted, you should select the ‘inside out’ finish option.
Your product has been pre-configured based on your requirements.
No. We offer both Velcro and sewn Heat Sleeving to give you options to fit without removing the line. Our Velcro Sleeving options are perfect for applications where the line cannot be removed.
The temperature range of our sleeves vary from 250°C, all the way up to continuous temperatures of 1000°C. We have a sleeving option to suit all requirements.
The selection of sleeves that we have available offer a range of different heat protection qualities, as well as Velcro or sewn/tube heat sleeves to offer flexibility when the line or hose cannot be removed.
We offer three main types of Heat Sleeving here at Funk Motorsport.
Funk Motorsport Silver Heat Sleeving protects up to 250°C, while our Funk Motorsport High Heat Silicon Sleeving protects up to continuous temperatures of 1000°C. Looking for something in-between? Check out our Funk Motorsport Gold Sewn Heat Sleeving, offering protection for up to 450°C.
These are all available in a variety of diameters and lengths to suit your requirements. Simply choose a diameter and length and add to cart. Funk Motorsport Gold and Silver Reflective Heat Sleeving are also available in Velcro versions, to help for those applications where removal of the pipe isn’t possible
We simply need two measurements to find the correct size Heat Sleeving that you need – the diameter (this is the total width of the hose/line/cable that you are looking to protect), and the length of the area you are looking to protect.
Once you have these, select a diameter which is the same size, or slightly larger than the line you are trying to protect. All of the measurements on our website are in mm and refer to the internal diameter of our Heat Sleeves.
Still unsure on which Heat Sleeving product you need for your application? Get in contact, where we will be more than happy to find the correct Heat Sleeving for you.
Heat Sleeving is an essential product used to protect lines and hoses against direct heat and general heat within the engine bay. They can also be used to protect fuel lines, coolant hoses, or electronic cables from rubbing and chaffing on the outside. When it comes to the safety and reliability of your car, ensure your vital lines are protected with Funk Motorsport Heat Sleeving.
Brake fluid that is too hot, is a safety issue. This can usually be caused by a master cylinder, or brake lines working outside of their optimal temperature range. A Reservoir Blanket along with our Heat Protection Sleeving can be a great way of protecting the sensitive brake fluid, to retain a solid and reliable brake pedal.
Of course! Many products that we have can be used for multiple applications, or, we can create a complete bespoke solution, get in touch to discuss the specific heat protection you need!
When sensors get hot, their output signal can be distorted. This can result in a poor preforming engine due to the ECU not reading reliable data! Sensor Protectors are a cheap easy to fit solution to help remedy this and protect sensors from excessive heat.
Weak spark / combustion can be caused by HT leads, or Spark Plugs exceeding their designed temperature threshold. Spark Plug Boots can keep a strong ignition spark, by protecting Spark Plugs and HT leads from over exposure to heat, resulting in bigger BANG in the combustion chamber!
As with all electronic components, Starter Motors are sensitive to constant heat changes. Heating and cooling of a Starter Motor can cause premature failure, a Starter Motor Protection Blanket is a simple way to extend the life of your Starter Motor!
