• Funk Motorsport Mk3 Turbo Blanket - 00014
  • Funk Motorsport Mk3 Turbo Blanket - 00014
  • Funk Motorsport Mk3 Turbo Blanket - 00014
  • Funk Motorsport Mk3 Turbo Blanket - 00014
  • Funk Motorsport Mk3 Turbo Blanket - 00014

Mitsubishi Lancer Evo 4 Turbo Blanket

From: £155.00

Funk Motorsport Turbo Blankets are made from the highest quality materials and are available for all turbo applications in both Carbon Fibre and Titanium Lava Rock.. 

Clear

Description

The Mitshubshi Lancer Evo 4 Turbo blanket is designed specifically to work around the internal wastegate found on this turbocharger. As you can see from the imagery, the turbo jacket has a perfect cut out to sit comfortably on the Evo turbo, while providing maximum protection, and zero interference. With the Mitsubishi Evolution being known for its high revving, high performance rally set up, hot air builds up at the front of the engine, and causes massive heat soak throughout the engine bay. A turbo blanket will help INCREASE Power over and provide a more consistent power curve, REDUCE heat soak within the engine bay, REDUCE air intake temperatures, IMPROVE reliability and PROTECT surrounding components from damaging heat.

The Evo 4 Blanket is based around the construction of the Mk3. Turbo blanket, which has reinvented the durability and performance of the turbo blanket. With an all new construction for 2020, thicker insulation, and a better all-round aesthetic. Check out this video to see it in action on the Dyno!

Due to the close proximity between the two halves of the turbo, it is extremely common for heat sink to occur. This can decrease performance output while increasing the work of the input components during the combustion cycle. Funk Motorsport Turbo blankets are designed to keep the hot side of your turbo insulated while keeping the cold side at optimum temperatures. This helps to provide cooler airflow to the cooling system and MAF sensor, leading to an increased ignition spark and higher output of energy from combustion. By ensuring that the turbine sector of the turbo remains hot, less heat will be dissipated into the engine bay, ensuring that exhaust gases will flow with less turbulence from the exhaust. See this in action in our video section!

Why is heat management so important? Find out here.

Additional information

Weight0.5 kg

Additional Info

Note of caution:
This turbo blanket is not flammable. However if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced. Please ensure that all necessary precautions are taken in regards to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charging and fuel injection system. Funk Motorsport take no responsibility for fluid contamination our products.

Whilst this heat shield is removable after fitment, it is not designed to be removed once a number of heat cycles has been introduced into the product. After the blankets have been heated they will lose some of their internal construction properties, though we must stress that this does not reduce any thermal properties of the product.

Interior Surface:
Max Temperature Rating: 1260 Deg C
Continuous Use Limit: 1000 Deg C

Exterior Surface (Titanium)
Direct Contact Limit: 982 Deg C
Radiant Heat Limit: 1371 Deg C

Reviews

There are no reviews yet.

Be the first to review “Mitsubishi Lancer Evo 4 Turbo Blanket”

Your email address will not be published. Required fields are marked *